-
-
-
1999 ICE Saturn, Tachometer signal at 1000 RPM and 10 millisecond
-
-
Original Crank Sensor Installed on electric motor
-
-
-
Cherry Switch GS100502
-
-
Pattern of Tachometer Working In a 1999 ICE Saturn about 1000 rpm
-
-
Tachometer In a 1999 ICE Saturn
-
-
Tachometer Records Electric Motor REVs For First Time
-
-
Tachometer Driving Home Feb 19 2009
-
-
tach speed sensor and ring
-
-
-
Tach Scope Signal
-
-
I attached the tach generator to a positive feed at the ALDL connector, ground to pedal bracket and yellow lead to the tachometer lead going into the cluster.I attached the tach generator to a positive feed at the ALDL connector, ground to pedal bracket and yellow lead to the tachometer lead going into the cluster.
-
-
Tach Chip Works
-
-
Adjusting The Pot: Tach generator Dave Koller built. Adjusting the pot made the tachometer swing from 1000 RPM to 6800 RPM
-
-
Tach Chip at 1000 RPM: 1000 RPM with the graph at 10 milliseconds
-
-
Tach Chip 6800 RPM: Voltmeter graph at 10 milliseconds
-
-
-
Cutting Tach white wire
-
-
-
-
-
-
-
tach – crank sensor bracket
-
-
-
-
-
Cherry Sensor
-
-
-
new reluctor ring attempt
-
-
Fabricating Instrument Gauges Sept 23 2008
-
-
Speed Sensor Setup Attempt: using original crank sensor, never worked but it put out a good analog signal
-
-
1999 ICE Saturn, Tachometer scoped at 2000 RPM
-
-
-
-
-
-
-
-
-
-
cutting notches
-
-
wide and narrow notches
-
-
Wiring Up The Instruments Dec 7
-
-
Instrument Finished Dec 7
-
-
Instrument Cluster Back with soldered gauge light wires..
-
-
